2005 (55) DAF LF 55.220 - Whale Tanker

Price:	£14,750.00
Got questions?	Ask here!

DAF LF 55.220 Whale Tanker
**Low KM's 160,00 km **
Excellent Working Order Whale Serviced Regularly 
Long MOT
Please call 07823 777 977 for further information 
Full Build Specification Below (Whale Build No: P31826):


18 TONNE GVW MEDIUM VOLUME COMBINATION "GULLYWHALE"


PTO: Two required
TANK
Shape/Thickness: Cylindrical/5.00mm
Material: Carbon Steel
Internal Finish: Stainless Steel lining in lower half of sludge compartment
Contents: Water/sludge
Specific Gravity: 1.00
Nominal Capacity: 1800 gallons 8150 litres
Fall over length: Parallel
Mountings: Ram cradle at front, tipping hinges at rear, including full length subframe if required
Tipping: Single front mounted multi-stage ram, controlled from nearside
Height indicator: Visual warning in cab to alert driver if overhead equipment or tipping body not stowed correctly. To
comply with regulations Construction Use 1986 Amendment SI 1997 No 530
Safety: Integral body-prop, operated from nearside
PRV: Tank-top Whale patented PRV, piped to ground with cable-pull.
PRV: In-line Whale PRV, PTFE components locked, sealed set piped to ground
Front End: Torispherical dish and flange to BS.5500
Rear End: Hydraulic torispherical door with internal dewatering screen
Door Clamps: Hydraulic Door Clamps with controls on nearside
Division: One with 20" dia bolted man access. Compartment ratio: 3650 litres Clean 4500 litres Dirty
Interconnection: Kerbside operated 2" ball valve
CONTENTS INDICATOR
Sight Glass: 2" Diameter acrylic sight glass in rear compartment with cleaning and rodding access. 2" diameter
acrylic full length sight glass in water compartment.
VALVES
Resealing: 2" resealing valves on both sides dirty water blow back down gully pipe
Inlet/Outlet valve: 4" lever operated valve
Inlet/Outlet con: 4" URT with blank cap
Filter valve: 4" lever operated valve
Filter con: 4" URT with blank cap
Page of 3
GULLY ARM TYPE 5" full bore, 300 degree. rotation, counterbalanced air-assisted.
: Sludge breaker fitted to downpipe
Parking: Permanent on nearside, temporary on offside
Valve: 6" full bore pneumatically controlled from chassis nearside and offside
VACUUM SYSTEM
Exhauster: Mistral 400 series exhauster/compressor. Output: 245 cfm
: System deoiler
Drive: PTO with propshaft guard, automatic engine speed setting
Cut-off: Primary and Secondary overspill canister with cut out 1.1/2" drain
Protection: Suction side grit strainer check valve
Control: Pressure or vacuum pneumatically operated
Control location: All controls at nearside, offside and rear workstation control panel and on the gully arm as required.
Vacuum pump engagement and changeover are duplicated on the offside and rear
Gauges: Vacuum/pressure, calibrated in working pressure vacuum mounted on gully arm and in rear control
panel
JETTING SYSTEM
Water Intake: Approved no back syphon hydrant filler Std 2.1/2" quick coupling
Jetting pump: ORCA 125 high pressure pump (125 l/min at 125 bar)
Drive: PTO with propshaft guards automatic engine speed setting
PTO Control location: In rear control panel and on nearside
Main hose reel: Self-aligning hydraulically operated reel with 100m 3/4" HP hose
2nd Hose reel: Manually-operated reel on nearside with 30m 1/2" high pressure hose
Equipment: Handlance with fan and needle nozzles. Domestic drain Nozzle and Pipe vice.
Specified Detail: Spec hand gun, part number RL19 (RL160)
: With Extension of 18"
: Extension end part number 3/8" F13.363
: Nipple 13.367
: Coupling 13.364
Nozzle: Standard Retro nozzle. Standard Forward/Retro nozzle.
Protection: Automatic audible low-water warning auto-dump circuit
Gauges: Water pressure calibrated in PSI and BAR mounted in rear control panel and secondary hose reel panel
Safety: Emergency engine stop in rear control panel
STORAGE
Hose storage: Hose box on offside, lockable
Other storage: Tipping stick box and separate tool rack on nearside
: Storage for Hydrant standpipe and key Storage for road signs
: Cone spike
Mudguards: 14 SWG steel with reflective safety mudflaps integral with hose box
GENERAL
Regulations: Construction and Use. S.I. 128-2000
P.E.D. To comply with The Pressure Systems Regulations SI 1999 No. 2001 Directive No 97/23/EC
Insurance: £5M Products Liability cover
Quality Ass: Design Construction insurance approval plate
Testing: Hydraulic test to 23 psi/full vacuum. Operating pressure/vacuum 15 psi/28"Hg
Commissioning: day commissioning instruction
Weight ticket: Weight ticket supplied
Labels: Safety labels and Operator Handbook
Delivery: Delivered to your nominated site
Page of 3
LIGHTING
: End outline marker lights side marker lights and reflectors
: Amber flashing beacon fitted at rear on offside
: Worklight fitted on Gully boom
: Worklight fitted at rear
PAINTWORK SEE PAINT SPECIFICATION
EXTRAS
Hoses: None
Other features: Automatic PTO disengagement linked to handbrake
: Electric handwash unit
: Adjustable traffic directing arrow to rear, 750 mm diameter
OPTIONS INCLUDED
Internal Finish: Stainless Steel lining in lower half of sludge compartment
: Chassis mounted air operated grid lifter
: Additional Paint Colours 2
FREE ISSUE CHASSIS
Chassis Dealer: Barnes Daf Reading
Contact:
Telephone:
Chassis: DAF FA LF 55.220, 18 tonne GVW. 4150mm wheelbase. Fitted with ZF6S-850 gearbox with 2
PTO apertures. Engine all speed governor
: Please note that the 250HP Engine and Eaton 6309 Gearbox is NOT SUITABLE
Drive: Right hand drive
Overall Height: 3.65 metres
Overall Width: 2.5 metres
Overall Length:
Unladen Weight:
Vehicle Exhaust: DEALER FITTED DAF Overhead overhead exhaust system
SPECIFICATION ENDS

Also published at eBay.co.uk