RUST STOP ELECTRONIC RUST PROTECTION 24 VOLT HEAVY DUTY TRUCKS BUSES MOBILE HOME

Condition:	Brand New
Manufacturer Part Number:	Electronic Rust Protection Rust Stop RS.5 24 Volt
Brand:	RUSTSTOP
Compatible Manufacturers:	Trucks Buses Mobile Homes Heavy Commercials
UPC:	Not Applicable
Price:	(approximately ##1##)
Got questions?	Ask here!

Rust-Stop Electronic Rust Protection System Trucks Buses Mobile Homes Heavy Commercials
EXPRESS POSTAGE 24 Volt Electrodes DOWNLOAD INSTALLATION GUIDE HERE https://www.dropbox.com/s/omzfqyhjqh4azt1/RS-5%20Installation%20Manual%20AU%20QBI%2001-2015.pdf?dl=0
New RustStop RS5 5.3 Heavy Duty 24 Volt Anodes Electronic Rust Protection
6 Anodes to suit 24 volt 4x4, bus, truck, mobile homes, heavy commercials
24 Hour Protection for your 4WD truck, bus, mobile home, heavy commercial 100% of Metal Protected inside and out, where sprays cannot reach.Separate Two-Channel Output gives intelligent protection where you need it most.Combines two proven technologies making it effective in wet and dry conditions.
Designed by certified engineers with over 40 years experience in electronic rust protection and electronic rust prevention.RustStop® RS-5 uses dual technology to be effective in both wet and dry conditions.The Anodes (Rust Magnets™) give customers visual proof that the system is working;Suitable for New and Used vehicles;It helps protect the entire car, inside and outside, which sprays cannot do;Backed by Independent test results.RustStop® RS-5 even helps control formed rust from spreading via electronic rust control;As spray on coatings only protect the particular area they cover, they are prone to being worn off and need to be maintained on regular basis.Electronic rust proofing will compliment any other undercoating or spray-on type rust proofing, increasing your protection, as rust protection electronic can only improve your rust defence.Transferrable from vehicle to vehicle;Simple 5-Step Installation, no special tools needed;Available in 12V and 24V models suitable for cars, trucks, buses, trucks etc.;RustStop® RS-5 has four indicator lights i.e. Operate Light, Fault Light, Max Output and Battery Low Light.Uses less battery current than most vehicle alarm systems;Will not interfere with other electrical installations;Ten (10) Year WarrantyTesting and TestimonialsHeriot Watt University, United KingdomShogun Testing FacilitiesElectronics Incorporated (Safety Tests)Sapref (Shell and BP, South African Petroleum Refineries)Engen RefineryTelkomFlamingo Plant Hire (A Barloworld Company)AA Motorist Magazine (Did an article on the effectiveness of ERP)BRIEF ANSWERRustStop® RS-5 uses special partially conductive tape on the Anodes (Rust Magnets™) which acts as constant electrolyte ensuring conductivity and protection in wet and dry conditions.See the Installation Videos Belowhttps://www.youtube.com/watch?v=V_vcNDtbI-whttps://www.youtube.com/watch?v=xn-WdZwCE2YFULL ANSWERBasis for the argument:Original Cathodic Protection systems, like for pipelines, had the anodes totally separated from the steel being protected. This technology relied on the soil between the anode and pipe to be conductive in order for protection to occur. The soil became the electrolyte.It could never be used on open-air equipment because there was no way for an anode to hold stronger charge, and still impress current to the steel. If the anode was in contact with the steel, the charge was short circuited and if it was separate is was insulated, hence zero protection.
So in order for protection to occur, the anode needs to be separate so strong charge can be held, but have conductive material between (electrolyte) that would allow current to pass, but not create direct short.Why RustStop® RS-5 is so effective:RustStop® RS-5 does not use classic cathodic protection.The secret lies in the special tape that hold the Anodes (Rust Magnets™) on.This tape is specially made graphite based, open-cell partially conductive tape which allows the positive 45V to be held, but still allows current to pass through. So the tape becomes constant electrolyte, in wet and dry conditions.Because it is open-cell, the tape also responds to any moisture present, even atmospheric humidity and increases conductivity and protection when needed most.RustStop® RS-5 is available in various models to suite the vehicle size, corrosive conditions and battery voltage.----RustStop® RS-5 (12 VOLT)Designed for normal use 12V vehicles, including cars, 4WDs, utes, vans etc. Includes Anodes (Rust Magnets™).Simple DIY Installation$270 ORDER NOW LINK BELOW                                                               
                                                           Buy Rust Stop Now From Our Ebay Store

Also published at eBay.com.au